This is pdfTeX, Version 3.1415926-2.4-1.40.13 (TeX Live 2012/Debian) (format=pdflatex 2013.7.6) 30 JUL 2013 16:32 entering extended mode restricted \write18 enabled. %&-line parsing enabled. **\input normaletronque.tex (./normaletronque.tex \du=\skip41 ! LaTeX Error: Environment tikzpicture undefined. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.14 \begin{tikzpicture} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Undefined control sequence. l.15 \pgftransformxscale {1.000000} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: Missing \begin{document}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.15 \pgftransformxscale{1 .000000} You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. Missing character: There is no 1 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Undefined control sequence. l.16 \pgftransformyscale {-1.000000} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no - in font nullfont! Missing character: There is no 1 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Undefined control sequence. l.17 \definecolor {dialinecolor}{rgb}{0.000000, 0.000000, 0.000000} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no g in font nullfont! Missing character: There is no b in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Undefined control sequence. l.18 \pgfsetstrokecolor {dialinecolor} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! ! Undefined control sequence. l.19 \definecolor {dialinecolor}{rgb}{1.000000, 1.000000, 1.000000} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no g in font nullfont! Missing character: There is no b in font nullfont! Missing character: There is no 1 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 1 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 1 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Undefined control sequence. l.20 \pgfsetfillcolor {dialinecolor} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! ! Undefined control sequence. l.21 \pgfsetlinewidth {0.100000\du} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 1 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. } l.21 \pgfsetlinewidth{0.100000\du} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). } l.21 \pgfsetlinewidth{0.100000\du} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. l.22 \pgfsetdash {}{0pt} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 0 in font nullfont! Missing character: There is no p in font nullfont! Missing character: There is no t in font nullfont! ! Undefined control sequence. l.23 \pgfsetdash {}{0pt} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 0 in font nullfont! Missing character: There is no p in font nullfont! Missing character: There is no t in font nullfont! ! Undefined control sequence. l.24 \pgfsetbuttcap The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.26 \definecolor {dialinecolor}{rgb}{0.000000, 0.000000, 0.000000} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no g in font nullfont! Missing character: There is no b in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Undefined control sequence. l.27 \pgfsetfillcolor {dialinecolor} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! ! Undefined control sequence. l.29 \pgfsetarrowsstart {stealth} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no s in font nullfont! Missing character: There is no t in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no t in font nullfont! Missing character: There is no h in font nullfont! ! Undefined control sequence. l.30 \pgfsetarrowsend {stealth} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no s in font nullfont! Missing character: There is no t in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no t in font nullfont! Missing character: There is no h in font nullfont! ! Undefined control sequence. l.31 \definecolor {dialinecolor}{rgb}{0.000000, 0.000000, 0.000000} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no g in font nullfont! Missing character: There is no b in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Undefined control sequence. l.32 \pgfsetstrokecolor {dialinecolor} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! ! Undefined control sequence. l.33 \draw (18.000000\du,24.000000\du)--(36.000000\du,24.000000\du); The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no ( in font nullfont! Missing character: There is no 1 in font nullfont! Missing character: There is no 8 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Illegal unit of measure (pt inserted). . l.33 \draw (18.000000\du,24. 000000\du)--(36.000000\du,24.000000\du); Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. ) l.33 \draw (18.000000\du,24.000000\du) --(36.000000\du,24.000000\du); A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). ) l.33 \draw (18.000000\du,24.000000\du) --(36.000000\du,24.000000\du); Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Missing character: There is no ) in font nullfont! Missing character: There is no - in font nullfont! Missing character: There is no - in font nullfont! Missing character: There is no ( in font nullfont! Missing character: There is no 3 in font nullfont! Missing character: There is no 6 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Illegal unit of measure (pt inserted). . l.33 ...000000\du,24.000000\du)--(36.000000\du,24. 000000\du); Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. ) l.33 ...24.000000\du)--(36.000000\du,24.000000\du) ; A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). ) l.33 ...24.000000\du)--(36.000000\du,24.000000\du) ; Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Missing character: There is no ) in font nullfont! Missing character: There is no ; in font nullfont! ! Undefined control sequence. l.35 \pgfsetlinewidth {0.100000\du} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 1 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. } l.35 \pgfsetlinewidth{0.100000\du} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). } l.35 \pgfsetlinewidth{0.100000\du} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. l.36 \pgfsetdash {}{0pt} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 0 in font nullfont! Missing character: There is no p in font nullfont! Missing character: There is no t in font nullfont! ! Undefined control sequence. l.37 \pgfsetdash {}{0pt} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 0 in font nullfont! Missing character: There is no p in font nullfont! Missing character: There is no t in font nullfont! ! Undefined control sequence. l.38 \pgfsetbuttcap The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.40 \definecolor {dialinecolor}{rgb}{0.000000, 0.000000, 0.000000} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no g in font nullfont! Missing character: There is no b in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Undefined control sequence. l.41 \pgfsetfillcolor {dialinecolor} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! ! Undefined control sequence. l.43 \pgfsetarrowsend {stealth} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no s in font nullfont! Missing character: There is no t in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no t in font nullfont! Missing character: There is no h in font nullfont! ! Undefined control sequence. l.44 \definecolor {dialinecolor}{rgb}{0.000000, 0.000000, 0.000000} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no g in font nullfont! Missing character: There is no b in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Undefined control sequence. l.45 \pgfsetstrokecolor {dialinecolor} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! ! Undefined control sequence. l.46 \draw (27.000000\du,24.000000\du)--(27.000000\du,15.000000\du); The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no ( in font nullfont! Missing character: There is no 2 in font nullfont! Missing character: There is no 7 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Illegal unit of measure (pt inserted). . l.46 \draw (27.000000\du,24. 000000\du)--(27.000000\du,15.000000\du); Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. ) l.46 \draw (27.000000\du,24.000000\du) --(27.000000\du,15.000000\du); A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). ) l.46 \draw (27.000000\du,24.000000\du) --(27.000000\du,15.000000\du); Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Missing character: There is no ) in font nullfont! Missing character: There is no - in font nullfont! Missing character: There is no - in font nullfont! Missing character: There is no ( in font nullfont! Missing character: There is no 2 in font nullfont! Missing character: There is no 7 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Illegal unit of measure (pt inserted). . l.46 ...000000\du,24.000000\du)--(27.000000\du,15. 000000\du); Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. ) l.46 ...24.000000\du)--(27.000000\du,15.000000\du) ; A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). ) l.46 ...24.000000\du)--(27.000000\du,15.000000\du) ; Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Missing character: There is no ) in font nullfont! Missing character: There is no ; in font nullfont! ! Undefined control sequence. l.48 \pgfsetlinewidth {0.100000\du} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 1 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. } l.48 \pgfsetlinewidth{0.100000\du} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). } l.48 \pgfsetlinewidth{0.100000\du} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. l.49 \pgfsetdash {}{0pt} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 0 in font nullfont! Missing character: There is no p in font nullfont! Missing character: There is no t in font nullfont! ! Undefined control sequence. l.50 \pgfsetdash {}{0pt} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 0 in font nullfont! Missing character: There is no p in font nullfont! Missing character: There is no t in font nullfont! ! Undefined control sequence. l.51 \pgfsetmiterjoin The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.52 \pgfsetbuttcap The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.54 \definecolor {dialinecolor}{rgb}{0.000000, 0.000000, 0.000000} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no g in font nullfont! Missing character: There is no b in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Undefined control sequence. l.55 \pgfsetfillcolor {dialinecolor} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! ! Undefined control sequence. l.57 \definecolor {dialinecolor}{rgb}{0.000000, 0.000000, 0.000000} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no g in font nullfont! Missing character: There is no b in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Undefined control sequence. l.58 \pgfsetstrokecolor {dialinecolor} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! ! Undefined control sequence. l.59 \pgfpathmoveto {\pgfpoint{21.000000\du}{24.000000\du}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.59 \pgfpathmoveto{\pgfpoint {21.000000\du}{24.000000\du}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 2 in font nullfont! Missing character: There is no 1 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. } l.59 \pgfpathmoveto{\pgfpoint{21.000000\du} {24.000000\du}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). } l.59 \pgfpathmoveto{\pgfpoint{21.000000\du} {24.000000\du}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Missing character: There is no 2 in font nullfont! Missing character: There is no 4 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. } l.59 ...veto{\pgfpoint{21.000000\du}{24.000000\du} } A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). } l.59 ...veto{\pgfpoint{21.000000\du}{24.000000\du} } Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. l.60 \pgfpathcurveto {\pgfpoint{24.000000\du}{24.000000\du}}{\pgfpoint{25.008... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.60 \pgfpathcurveto{\pgfpoint {24.000000\du}{24.000000\du}}{\pgfpoint{25.008... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 2 in font nullfont! Missing character: There is no 4 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. } l.60 \pgfpathcurveto{\pgfpoint{24.000000\du} {24.000000\du}}{\pgfpoint{25.008... A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). } l.60 \pgfpathcurveto{\pgfpoint{24.000000\du} {24.000000\du}}{\pgfpoint{25.008... Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Missing character: There is no 2 in font nullfont! Missing character: There is no 4 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. } l.60 ...veto{\pgfpoint{24.000000\du}{24.000000\du} }{\pgfpoint{25.008000\du}{... A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). } l.60 ...veto{\pgfpoint{24.000000\du}{24.000000\du} }{\pgfpoint{25.008000\du}{... Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. l.60 ...int{24.000000\du}{24.000000\du}}{\pgfpoint {25.008000\du}{18.000000\d... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 2 in font nullfont! Missing character: There is no 5 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 8 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. } l.60 ...du}{24.000000\du}}{\pgfpoint{25.008000\du} {18.000000\du}}{\pgfpoint{... A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). } l.60 ...du}{24.000000\du}}{\pgfpoint{25.008000\du} {18.000000\du}}{\pgfpoint{... Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Missing character: There is no 1 in font nullfont! Missing character: There is no 8 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. } l.60 ...du}}{\pgfpoint{25.008000\du}{18.000000\du} }{\pgfpoint{27.000000\du}{... A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). } l.60 ...du}}{\pgfpoint{25.008000\du}{18.000000\du} }{\pgfpoint{27.000000\du}{... Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. l.60 ...int{25.008000\du}{18.000000\du}}{\pgfpoint {27.000000\du}{18.000000\du}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 2 in font nullfont! Missing character: There is no 7 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. } l.60 ...du}{18.000000\du}}{\pgfpoint{27.000000\du} {18.000000\du}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). } l.60 ...du}{18.000000\du}}{\pgfpoint{27.000000\du} {18.000000\du}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Missing character: There is no 1 in font nullfont! Missing character: There is no 8 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. } l.60 ...du}}{\pgfpoint{27.000000\du}{18.000000\du} } A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). } l.60 ...du}}{\pgfpoint{27.000000\du}{18.000000\du} } Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. l.61 \pgfusepath {stroke} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no s in font nullfont! Missing character: There is no t in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no k in font nullfont! Missing character: There is no e in font nullfont! ! Undefined control sequence. l.63 \pgfsetlinewidth {0.100000\du} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 1 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. } l.63 \pgfsetlinewidth{0.100000\du} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). } l.63 \pgfsetlinewidth{0.100000\du} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. l.64 \pgfsetdash {}{0pt} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 0 in font nullfont! Missing character: There is no p in font nullfont! Missing character: There is no t in font nullfont! ! Undefined control sequence. l.65 \pgfsetdash {}{0pt} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 0 in font nullfont! Missing character: There is no p in font nullfont! Missing character: There is no t in font nullfont! ! Undefined control sequence. l.66 \pgfsetmiterjoin The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.67 \pgfsetbuttcap The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.69 \definecolor {dialinecolor}{rgb}{0.000000, 0.000000, 0.000000} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no g in font nullfont! Missing character: There is no b in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Undefined control sequence. l.70 \pgfsetfillcolor {dialinecolor} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! ! Undefined control sequence. l.72 \definecolor {dialinecolor}{rgb}{0.000000, 0.000000, 0.000000} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no r in font nullfont! Missing character: There is no g in font nullfont! Missing character: There is no b in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no , in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Undefined control sequence. l.73 \pgfsetstrokecolor {dialinecolor} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no d in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no a in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no i in font nullfont! Missing character: There is no n in font nullfont! Missing character: There is no e in font nullfont! Missing character: There is no c in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no l in font nullfont! Missing character: There is no o in font nullfont! Missing character: There is no r in font nullfont! ! Undefined control sequence. l.74 \pgfpathmoveto {\pgfpoint{27.000000\du}{18.000000\du}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.74 \pgfpathmoveto{\pgfpoint {27.000000\du}{18.000000\du}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 2 in font nullfont! Missing character: There is no 7 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. } l.74 \pgfpathmoveto{\pgfpoint{27.000000\du} {18.000000\du}} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). } l.74 \pgfpathmoveto{\pgfpoint{27.000000\du} {18.000000\du}} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) Missing character: There is no 1 in font nullfont! Missing character: There is no 8 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. } l.74 ...veto{\pgfpoint{27.000000\du}{18.000000\du} } A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). } l.74 ...veto{\pgfpoint{27.000000\du}{18.000000\du} } Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. l.75 \pgfpathcurveto {\pgfpoint{29.324000\du}{18.000000\du}}{\pgfpoint{30.000... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.75 \pgfpathcurveto{\pgfpoint {29.324000\du}{18.000000\du}}{\pgfpoint{30.000... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Missing character: There is no 2 in font nullfont! Missing character: There is no 9 in font nullfont! Missing character: There is no . in font nullfont! Missing character: There is no 3 in font nullfont! Missing character: There is no 2 in font nullfont! Missing character: There is no 4 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! Missing character: There is no 0 in font nullfont! ! Missing number, treated as zero. } l.75 \pgfpathcurveto{\pgfpoint{29.324000\du} {18.000000\du}}{\pgfpoint{30.000... A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). } l.75 \pgfpathcurveto{\pgfpoint{29.324000\du} {18.000000\du}}{\pgfpoint{30.000... (That makes 100 errors; please try again.) Here is how much of TeX's memory you used: 7 strings out of 493485 174 string characters out of 3143527 47818 words of memory out of 3000000 3414 multiletter control sequences out of 15000+200000 3640 words of font info for 14 fonts, out of 3000000 for 9000 957 hyphenation exceptions out of 8191 6i,0n,10p,160b,18s stack positions out of 5000i,500n,10000p,200000b,50000s ! ==> Fatal error occurred, no output PDF file produced!